OSI/FTAM Configuration and Management Manual

Monitoring FTAM Performance
OSI/FTAM Configuration and Management Manual—421944-001
5-3
Displaying Process Status
Displaying Process Status
To ensure that your FTAM subsystem is running correctly, you should monitor the status
of FTAM initiator and responder processes. To display this information, issue the
STATUS PROCESS command either to the FTAM initiator or responder process directly
or to the FTAM process indirectly (through APLMGR).
To issue the STATUS PROCESS command to the example initiator $FTI1 (with the
DETAIL option), enter the following:
STATUS PROCESS $FTI1, DETAIL
This command returns the following display:
This display shows that the $FTI1 process has a backup process and is started, is
configured to accept new opens, and has three openers—SCP ($ZNET), $AMGR, and
an application opener. A trace is not currently in progress.
The following screen shows the additional information displayed when the value for
Trace is ON:
OSIFTAM Detailed Status PROCESS \NET.$FTI1
State.............. STARTED
PPID............... 1,75 BPID..................2,47
Ownerid............ 50,255
Stopopens.......... OFF Opens................ 3
OSIAPLMG Internal Name.. \NET.$AMGR.#FTAMI.FTI1
Trace.............. OFF
SIFTAM Detailed Status PROCESS \NET.$FTI1
State.............. STARTED
PPID............... 1,75 BPID...............2,47
Ownerid............ 50,255
Stopopens.......... OFF Opens..............3
OSIAPLMG Internal Name.. \NET.$AMGR.#FTAMI.FTI1
Trace.............. ON
Trace Options
MEM SYSMSG DSM MSG SM USER PROV ASN1
Trace File......... \NET.$OSI.TEST.TRACE