OSI/FTAM Configuration and Management Manual

Example FTAM Configuration Command Files
OSI/FTAM Configuration and Management Manual—421944-001
A-3
APLMGR Subsystem
The CPU p/b, program-file, and PRI attributes are configured when you create
APLMGR using the TACL RUN command. These attributes are not configured using
SCF. See Creating and Starting the APLMGR Process on page 3-46 for an example of
the command used to configure these attributes. You can view the values of these
attributes by sending the SCF INFO PROCESS command to the APLMGR process.
The final five attributes in Table A-2
on page A-2 are configured using the SCF ALTER
SUBSYS command. You can view the values for these attributes in an installation by
sending the SCF INFO SUBSYS command to the APLMGR process.
FTAMRFILE The fully qualified Guardian name of
the file containing the code for the
FTAM responder processes. You can
configure this attribute using the SCF
ALTER SUBSYS command.
$SYSTEM.SYSnn.FTAMROBJ
MIB The fully qualified Guardian name of
the primary MIB file where the
APLMGR process stores configuration
information. You can configure this
attribute using the SCF ALTER
SUBSYS command.
$DATA.ZAPLMMIB.ZOSADB
OMGRNAME The Guardian name of the OSI
manager process for the OSI/AS
subsystem providing services to
Tandem FTAM.
$OSM1
Table A-2. Attribute Values for Example APLMGR (page 2 of 2)
Attribute Description Value Set for This Example