OSI/FTAM Configuration and Management Manual

Example FTAM Configuration Command Files
OSI/FTAM Configuration and Management Manual—421944-001
A-13
Command File to Configure Tandem FTAM
Addresses in OSI/AS
== Local common names
ADD ENTRY $OSM1.#APPL.FTMI1A, PSEL 01, SSEL 0110 &
, TSEL 07, NSAP 03
ADD ENTRY $OSM1.#APPL.FTMI2A, PSEL 17, SSEL 0112 &
, TSEL 03, NSAP 03
ADD ENTRY $OSM1.#APPL.APPL1A, PSEL 03, SSEL 0114 &
, TSEL 05, NSAP 03
== Remote Common Names
== These address components must be the ones expected by
== the remote entity. Some remote entities might not
== expect a PSEL or SSEL.
ADD ENTRY $OSM1.#TSEL.16 &
, SERVER $OSM1.#TAPS.L51 &
, PROFILE $OSM1.#L5.L5PROF
ADD ENTRY $OSM1.#APPL.FTMR1B, PSEL 10, SSEL 0119 &
, TSEL 16, NSAP 04
=============================================================
== Check correspondence between local entries.
=============================================================
ALLOW ALL
CHECK ENTRY $OSM1.#APPL.FTMI1A, PROFILES, SERVERS
CHECK ENTRY $OSM1.#APPL.FTMI2A, PROFILES, SERVERS
CHECK ENTRY $OSM1.#APPL.APPL1A, PROFILES, SERVERS
ALLOW NO