OSI/FTAM Configuration and Management Manual

Example FTAM Configuration Command Files
OSI/FTAM Configuration and Management Manual—421944-001
A-15
Starting an FTAM Installation
ADD PROFILE $AMGR.#VFS.VFS1, COMNAME "APPL1A" &
, DEFUSER "USER.BOB,passwd"
=============================================================
== Add and start the initiator and responder processes.
==
== Responders use the same VFS profile, and are therefore
== tied to the same OSI address.
== Default values for MAXASSOC (8) and MAXATTACH (8) are used
== for FTR2.
=============================================================
ADD PROCESS $AMGR.#FTAMI.FTI1, NAME $FTI1 &
, COMNAME "FTMI1A" &
, MAXASSOC 4 &
, CPU 1 &
, BACKUPCPU 2 &
, SWAP $OSI
START PROCESS $AMGR.#FTAMI.FTI1
ADD PROCESS $AMGR.#FTAMI.FTI2, NAME $FTI2 &
, COMNAME "FTMI2A" &
, MAXASSOC 10 &
, CPU 2 &
, BACKUPCPU 1 &
, SWAP $OSI
START PROCESS $AMGR.#FTAMI.FTI2
ADD PROCESS $AMGR.#FTAMR.FTR1, NAME $FTR1 &
, PROFILE $AMGR.#VFS.VFS1 &
, MAXASSOC 4 &
, MAXATTACH 4 &
, CPU 2 &
, BACKUPCPU 0 &
, SWAP $OSI
START PROCESS $AMGR.#FTAMR.FTR1
ADD PROCESS $AMGR.#FTAMR.FTR2, NAME $FTR2 &
, PROFILE $AMGR.#VFS.VFS1 &
, CPU 1 &
, BACKUPCPU 2 &
, SWAP $OSI
START PROCESS $AMGR.#FTAMR.FTR2
To return to the TACL environment, enter EXIT at the SCF prompt.