OSI/FTAM Configuration and Management Manual

FTAM Software Files
OSI/FTAM Configuration and Management Manual—421944-001
C-2
Table C-2 lists the filename, subvolume name, file type, and content description of each
FTAM subsystem file to install on your system. These files are part of Tandem product
number T6982.
Table C-2. FTAM Installation Subvolumes and Filenames (page 1 of 2)
Filename Subvolume File Type Description
EXCEXTF2 ZOSIFTAM EDIT Example C program to insert records
into a remote FTAM-2 file
EXCLOMIB ZOSIFTAM EDIT Example TACL command file to purge
data from existing OSI manager MIB
files
EXCLRMIB ZOSIFTAM EDIT Example TACL command file to purge
data from existing APLMGR MIB files
EXCMOVF3 ZOSIFTAM EDIT Example C program to move an FTAM-
3 file between two remote systems
EXCREAF3 ZOSIFTAM EDIT Example C program to read from a
remote FTAM-3 file
EXCTRAN1 ZOSIFTAM EDIT Example translation application.
EXEMF ZOSIFTAM EDIT TACL command file to load necessary
definitions and compile example filters
EXFLT1 ZOSIFTAM EDIT Example filter to limit events to those
from APLMGR and FTAM
EXFLT2 ZOSIFTAM EDIT Example filter to limit events to critical
events from APLMGR and FTAM
EXFTMDWN ZOSIFTAM EDIT Example SCF command file to shut
down FTAM environment
EXFTMUP ZOSIFTAM EDIT Example SCF command file to create
and start APLMGR, define VFS
profile, and add and start four FTAM
processes
EXOSIUP ZOSIFTAM EDIT Example SCF command file to create
and start the OSI manager process,
define profile and entry information,
configure and start layer processes, and
define common names and OSI
addresses. (This command file uses the
MIB file created by the OSI/AS input
file DBFUP.)
EXREADME ZOSIFTAM EDIT Brief descriptions (as in this table) of
all example files provided with the
FTAM subsystem
EXTBL1 ZOSIFTAM EDIT Example SCF command file to reset
statistics counters for configured
objects