OSI/FTAM Configuration and Management Manual
Introduction to Tandem FTAM
OSI/FTAM Configuration and Management Manual—421944-001
1-14
Software Requirements
Software Requirements
Table 1-2 lists the software products you need to have running on your system to use
Tandem FTAM. For a full description of Tandem software requirements, see the OSI/AS
Configuration and Management Manual.
Tandem FTAM can send and receive FTAM protocol data units (FPDUs) up to 16KB in
length.
Table 1-1. Communications Controller Requirements
Subnetwork Types Protocol/Interface Controllers
X.25 WANs RS-232C and RS-449
RS-232C
X.21 (leased lines)
V. 3 5
36xx, 61xx, 62xx
36xx
36xx, 61xx
36xx, 61xx
Local area subnetworks 802.3 CSMA/CD 36xx, 56xx
TCP/IP wide area networks X.25 36xx, 61xx, 62xx
36xx
36xx, 61xx
36xx, 61xx
Table 1-2. Software Requirements
Product
Number Product Name Description
T9570 Tandem OSI/AS OSI Application Services (ACSE, presentation, and
session services)
T9083 Tandem OSI/TS OSI Transport Services
T9375 TLAM
∗
Tandem LAN Access Method
T9379 MLMAN
∗
Manager process for TLAM
T9060 X25AM
∗
X.25 Access Method
T9395 SCP Subsystem Control Point
T9082 SCF Subsystem Control Facility
T9385 PTrace Print Trace utility
T6981 Tandem
OSI/APLMGR
OSI Application Manager
T6982 Tandem OSI/FTAM OSI File Transfer, Access and Management services
T9551 NonStop TCP/IP TCP/IP
∗
TLAM and MLMAN are required for LANs only; X25AM is required for WANs only.