OSI/FTAM Configuration and Management Manual

FTAM Management Environment
OSI/FTAM Configuration and Management Manual—421944-001
2-14
PROCESS Objects
PROCESS Objects
There are three types of processes in Tandem FTAM: the APLMGR process, the FTAM
initiator process, and the FTAM responder process. The PROCESS object type allows
you to address these processes individually. Using PROCESS objects, you can either
send commands directly to an APLMGR, FTAM initiator, or FTAM responder process,
or you can send commands to an FTAM initiator or responder process indirectly through
the APLMGR process.
Some commands require you to address initiator and responder processes directly, some
require you to go through the APLMGR process, and some give you the option of using
either method. In particular, only informational commands can be issued directly to an
FTAM initiator or responder process; commands that change the state or configuration
of a process must be sent through the APLMGR process. PROCESS Object Names
on
page 2-20 describes how to name processes to send commands to Tandem FTAM
processes directly or indirectly.
SCF Commands for the PROCESS Object
These commands can be issued directly to an FTAM process:
ALLOWOPENS
INFO
LISTOPENS
NAMES
STATS
STATUS
STOPOPENS
TRACE
These commands can be issued indirectly to an FTAM process (through the APLMGR
process):
ABORT
ACTIVATE
ADD
ALLOWOPENS
ALTER
DELETE
INFO
NAMES
START
STATUS
STOP
STOPOPENS
SUSPEND