OSI/FTAM Programming Reference Manual

FTM Procedures
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
4-48
FTM_DATA_END_IND_
diagnostic is an optional parameter.
Considerations
•
To complete this procedure call successfully, the association must be in the data-
transfer regime.
•
You must call APS_EVENT_RECEIVE_ to receive the indication event and
APS_STATUS_ to determine, via the APS_STATUS_ event-code parameter, the
proper indication procedure to use to retrieve the data. You must receive the
ZFTM-VAL-EVT-DATAEND-IND event before calling FTM_DATA_END_IND_.
•
You must call FTM_TRANSFER_END_REQ_ after completion of the
FTM_DATA_END_IND_ procedure call.
•
An action-result value of ZFTM-VAL-ACTION-FAILURE might indicate that
the responder has rejected a read request you issued previously.
Errors
For cause, effect, and recovery information on these errors, see Appendix B, NonStop
FTAM Initiator Error Messages.
Examples
Examples of the FTM_DATA_END_IND_ call in a program begin on line 1198 of the C
version and line 1287 of the TAL version of Example 2 in Appendix G, NonStop FTAM
Programming Examples.
Table 4-15. Possible FTAM Initiator Errors for the FTM_DATA_END_IND_
Procedure
Error Code FTAM Initiator Error
- 6000 ZFTM-ERR-INTERNAL
- 6017 ZFTM-ERR-INVALID-IF-VERSION
- 6018 ZFTM-ERR-INVALID-FIELD-VERSION
- 6036 ZFTM-ERR-SU-ABORTED