OSI/FTAM Programming Reference Manual

FTM Procedures
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
4-71
FTM_ERASE_REQ_
tag is an optional parameter.
Considerations
•
Before using this procedure, you must have negotiated the file-access functional
unit and file-access service class on the FTM_INITIALIZE_REQ_ call.
•
To complete this procedure call successfully, the association must be in the file-
open regime, and you must have set the ZERASE field of the process-mode
parameter (ZFTM-DDL-PROC-MODE) of the open request to ON.
•
For the remote responder to respond affirmatively to this erase primitive, the erase
field of the permitted-actions attribute of this file must be set to ON.
•
You must issue an MFM_AWAITIOX_ call to complete the nowait I/O operation if
you set the nowait operating mode in the FTM_INITIALIZE_REQ_ call.
Errors
For cause, effect, and recovery information on these errors, see Appendix B, NonStop
FTAM Initiator Error Messages.
Table 4-23. Possible FTAM Initiator Errors for the FTM_ERASE_REQ_ Procedure
Error Code FTAM Initiator Error
- 6000 ZFTM-ERR-INTERNAL
- 6001 ZFTM-ERR-OUT-OF-SEQUENCE
- 6002 ZFTM-ERR-FU-NOT-NEGOTIATED
- 6006 ZFTM-ERR-FADU-ID-INVALID
- 6008 ZFTM-ERR-PROC-MODE-NOT-AVAIL
- 6012 ZFTM-ERR-SERV-NOT-NEGOTIATED
- 6017 ZFTM-ERR-INVALID-IF-VERSION
- 6018 ZFTM-ERR-INVALID-FIELD-VERSION
- 6019 ZFTM-ERR-BAD-APS-STATUS
- 6022 ZFTM-ERR-CONNECTION-ABORTED
- 6036 ZFTM-ERR-SU-ABORTED