OSI/FTAM Programming Reference Manual

FTM Procedures
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
4-76
FTM_ERASE_CNF_
diagnostic is an optional parameter.
Considerations
•
To successfully complete this procedure call, the association must be in the
file-open regime.
•
Before calling FTM_ERASE_CNF_, you must call the following procedures:
FTM_ERASE_REQ_
APS_EVENT_RECEIVE_
APS_STATUS_
You call APS_EVENT_RECEIVE_ to receive the confirm event and
APS_STATUS_ to determine, via the APS_STATUS_ event-code parameter, the
proper confirm procedure to use to retrieve the data. You must receive the
ZFTM-VAL-EVT-ERASE-CNF event before calling FTM_ERASE_CNF_.
Errors
For cause, effect, and recovery information on these errors, see Appendix B, NonStop
FTAM Initiator Error Messages.
Example
For an example of a TAL program illustrating the use of the FTM_ERASE_CNF_
procedure, see the Example
on page 4-73 subsection in the FTM_ERASE_REQ_
procedure description.
Table 4-24. Possible FTAM Initiator Errors for the FTM_ERASE_CNF_ Procedure
Error Code FTAM Initiator Error
- 6000 ZFTM-ERR-INTERNAL
- 6017 ZFTM-ERR-INVALID-IF-VERSION
- 6018 ZFTM-ERR-INVALID-FIELD-VERSION
- 6036 ZFTM-ERR-SU-ABORTED