OSI/FTAM Programming Reference Manual

FTM Procedures
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
4-99
FTM_INITIALIZE_REQ_
The following table lists common errors that can occur on the FTM_INITIALIZE_REQ_
procedure call.
These error
values... are returned if....
Error Code:
Error Subcode:
Orig. Error Code:
Orig. Subcode:
ZFTM-ERR-BAD-APS-STATUS (-6019)
0
ZAPS-ERR-MGR-ERR (-126)
ZAPS-ERR-MGR-LOCAL-NAME (101)
The local application
name is not configured
in OSI/AS.
Error Code:
Error Subcode:
Orig. Error Code:
Orig. Subcode:
ZFTM-ERR-BAD-APS-STATUS (-6019)
0
ZAPS-ERR-MGR-ERR (-126)
ZAPS-ERR-MGR-REMOTE-NAME (102)
The remote application
name is not configured
in OSI/AS.
Error Code:
Error Subcode:
Orig. Error Code:
Orig. Subcode:
ZFTM-ERR-BAD-APS-STATUS (-6019)
0
ZAPS-ERR-MGR-ERR (-126)
ZAPS-ERR-MGR-LOCAL-NSAP (103)
The local NSAP name
is not configured in
OSI/AS.
Error Code:
Error Subcode:
Orig. Error Code:
Orig. Subcode:
ZFTM-ERR-BAD-APS-STATUS (-6019)
0
ZAPS-ERR-MGR-ERR (-126)
ZAPS-ERR-MGR-REMOTE-NSAP (104)
The remote NSAP
name is not configured
in OSI/AS.
Error Code:
Error Subcode:
Orig. Error Code:
Orig. Subcode:
ZFTM-ERR-BAD-APS-STATUS (-6019)
0
ZAPS-ERR-MGR-ERR (-126)
ZAPS-ERR-MGR-LOCAL-TSEL (105)
The local TSEL name is
not configured in
OSI/AS.
Error Code:
Error Subcode:
Orig. Error Code:
Orig. Subcode:
ZFTM-ERR-BAD-APS-STATUS (-6019)
0
ZAPS-ERR-L5-TRANS-FS-ERROR (-1001)
140
Transport connection
cannot be made. While
there are many causes
of this error, these are
the error codes
returned if the remote
responder is not active,
or if the
communications link is
severed.
Error Code:
Error Subcode:
ZAPS-ERR-FS-ERROR (-125) 13 The name provided for
the aplmgr-name
parameter is not a valid
NonStop process
name.
Error Code:
Error Subcode:
ZAPS-ERR-FS-ERROR (-125) 14 The application
manager process
designated by
aplmgr-name is not
currently running.