OSI/FTAM Programming Reference Manual

FTM Procedures
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
4-127
FTM_READ_ATTRIB_REQ_
•
To complete this procedure call successfully, you must have previously called
FTM_SELECT_REQ_, and the association must be in the file-selection regime.
•
For the remote responder to respond affirmatively to the read-attributes primitive,
the read-attributes field of the permitted-actions attribute of this file must be set to
ON.
•
You must issue an MFM_AWAITIOX_ call to complete the nowait I/O operation if
you set the nowait operating mode in the FTM_INITIALIZE_REQ_ call.
•
The read-attribute field of the requested-access parameter of the select
request must be set to ON.
Errors
For cause, effect, and recovery information on these errors, see Appendix B, NonStop
FTAM Initiator Error Messages.
Table 4-37. Possible FTAM Initiator Errors for the FTM_READ_ATTRIB_REQ_
Procedure
Error Code FTAM Initiator Error
- 6000 ZFTM-ERR-INTERNAL
- 6001 ZFTM-ERR-OUT-OF-SEQUENCE
- 6002 ZFTM-ERR-FU-NOT-NEGOTIATED
- 6017 ZFTM-ERR-INVALID-IF-VERSION
- 6018 ZFTM-ERR-INVALID-FIELD-VERSION
- 6019 ZFTM-ERR-BAD-APS-STATUS
- 6022 ZFTM-ERR-CONNECTION-ABORTED
- 6024 ZFTM-ERR-ATTR-GRP-NOT-NEG
- 6025 ZFTM-ERR-PRIVATE-USE-NOT-SUPP
- 6036 ZFTM-ERR-SU-ABORTED