OSI/FTAM Programming Reference Manual
FTM Procedures
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
4-145
FTM_TRANSFER_END_CNF_
provides information that qualifies the success or explains the failure of a
requested action. For a complete list of possible diagnostic values, see
Appendix C, ISO FTAM Diagnostic Messages.
diagnostic is an optional parameter.
Considerations
•
To complete this procedure call successfully, the association must be in the
data-transfer regime.
•
Before calling FTM_TRANSFER_END_CNF_, you must call the following
procedures:
FTM_TRANSFER_END_REQ_
APS_EVENT_RECEIVE_
APS_STATUS_
You call APS_EVENT_RECEIVE_ to receive the confirm event and
APS_STATUS_ to determine, via the APS_STATUS_ event-code parameter, the
proper confirm procedure to use to retrieve the data. You must receive the ZFTM-
VAL-EVT-TRANSEND-CNF event before calling FTM_TRANSFER_END_CNF_.
•
Receipt of the ZFTM-VAL-EVT-TRANSEND-CNF event returns the association to
the file-open regime.
Errors
For cause, effect, and recovery information on these errors, see Appendix B, NonStop
FTAM Initiator Error Messages.
Examples
Examples of the FTM_TRANSFER_END_CNF_ call in a program begin on line 1179 of
the C version and line 1141 of the TAL version of Example 1, and on line 1281 of the C
version and line 1374 of the TAL version of Example 2 in Appendix G, NonStop FTAM
Programming Examples.
Table 4-44. Possible FTAM Initiator Errors for the FTM_TRANSFER_END_CNF_
Procedure
Error Code FTAM Initiator Error
- 6000 ZFTM-ERR-INTERNAL
- 6017 ZFTM-ERR-INVALID-IF-VERSION
- 6018 ZFTM-ERR-INVALID-FIELD-VERSION
- 6036 ZFTM-ERR-SU-ABORTED