OSI/FTAM Programming Reference Manual

NonStop FTAM Initiator Error Messages
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
B-11
APS Error Codes
-121
Cause. An SPI error was encountered during the execution of the SSNULL procedure.
This is an internal error involving SPI buffer management.
Subcodes. The subcode indicates the error returned by SSNULL. For descriptions of
the SPI errors, refer to the Guardian Procedure Errors and Messages Manual.
Recovery. Follow the standard procedures at your site for contacting the appropriate
support personnel. These procedures might involve contacting your local HP support
analyst.
-122
Cause. An SPI error was encountered during the execution of the SSGET or the
SSGETTKN procedure. This is an internal error involving SPI buffer management.
Subcodes. The subcode indicates the error returned by SSGET or SSGETTKN. For
descriptions of the SPI errors, refer to the Guardian Procedure Errors and Messages
Manual.
Recovery. Trace the APLMGR process, as described in the OSI/FTAM and
OSI/APLMGR SCF Reference Manual or the OSI/FTAM Configuration and
Management Manual. Then follow the standard procedures at your site for contacting
the appropriate support personnel. These procedures might involve contacting your
local HP support analyst.
-123
Cause. An SPI error was encountered during the execution of the SSPUT or the
SSPUTTKN procedure. This is an internal error involving SPI buffer management.
Subcodes. The subcode indicates the error returned by SSPUT or SSPUTTKN. For
descriptions of the SPI errors, refer to the Guardian Procedure Errors and Messages
Manual.
Recovery. Follow the standard procedures at your site for contacting the appropriate
support personnel. These procedures might involve contacting your local HP support
analyst.
ZAPS-ERR-SSNULL
ZAPS-ERR-SSGET
ZAPS-ERR-SSPUT