OSI/FTAM Programming Reference Manual

NonStop FTAM Initiator Error Messages
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
B-13
APS Error Codes
Recovery. Recovery depends on the subcode received. For APLMGR-generated
values 7000, 7001, and 7002, stop the program and rerun it. If the problem persists,
follow the standard procedures at your site for contacting the appropriate support
personnel. These procedures might involve contacting your local HP support analyst.
For the value 7003, check the EMS event log file for an FTAM FS^ERR event (event
number 11). The Error value of the event message indicates the file-system error that
has occurred. For descriptions of file-system errors and appropriate recovery actions,
refer to the Guardian Procedure Errors and Messages Manual. APLMGR returns
subcode 7003, for example, if too many applications attempt to establish associations
with one initiator at the same time; when this happens, the initiator can become
overrun and generate a file-system error indicating an overflow problem.
For values 7004, 7005, and 7006, make sure that you have configured FTAM so that
there are FTAM processes in a started state and at less than maximum capacity.
-127
Cause. An internal FTAM API table error occurred.
Subcodes. None.
Recovery. Stop the program and rerun it. If the problem persists, follow the standard
procedures at your site for contacting the appropriate support personnel. These
procedures might involve contacting your local HP support analyst.
-128
Cause. The FTAM API has encountered an internal error in maintaining CEPIs.
Subcodes. None.
Recovery. Follow the standard procedures at your site for contacting the appropriate
support personnel. These procedures might involve contacting your local HP support
analyst.
ASE-UNAVAIL 7004 FTAM process not available
ASE-TBL-EMPTY 7005 FTAM process table empty, no processes defined, or
APLMGR is in suspended state
ASE-NOT-READY 7006 FTAM process not ready, no processes in started state
ZAPS-ERR-TABLE-ERROR
ZAPS-ERR-HASHTABLE-ERROR
Table B-3. APLMGR Subcodes (page2of2)
Constant
(ZFTM-ERR-MGR-) Value Meaning