OSI/FTAM Programming Reference Manual

NonStop FTAM Initiator Error Messages
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
B-19
FTAM Initiator Error Codes
-138
Cause. One or more parameters were outside the permissible range of values.
Subcodes. For FTM-procedure parameters, see Table B-4 on page B-16, and for
APS-procedure parameters, the OSI/AS Programming Manual.
Recovery. Correct your use of parameters, rebuild the application, and then retry the
operation.
-141
Cause. An operation was issued on a CEPI that was not allocated for an FTAM
service. For example, an FTM_SELECT_REQ_ procedure is called using a CEPI that
was allocated for an ACSE or Session service and not the one returned in a call to the
FTM_INITIALIZE_REQ_ procedure.
Subcodes. None.
Recovery. Retry using the CEPI returned from FTM_INITIALIZE_REQ_.
FTAM Initiator Error Codes
FTAM initiator error codes identify error messages that the FTAM initiator and FTAM
API can return. This subsection provides cause, effect, and recovery information for
each error code and indicates whether the error has subcodes associated with it.
Table B-5 lists the FTAM error codes in numeric order. Following the table, the error
descriptions are arranged also in numeric order. The related error subcode tables
appear throughout this subsection.
ZAPS-ERR-PARAM-RANGE
ZAPS-ERR-INVALID-SERVICE
Note. If your program is not set up to return error-code, error-subcode, and service-
id in the case of an error, you might need to modify it to do so.
Table B-5. FTAM Initiator Error Codes (page 1 of 2)
Constant (ZFTM-ERR-) Value Meaning
INTERNAL -6000 Internal error
OUT-OF-SEQUENCE -6001 Request received in invalid sequence
FU-NOT-NEGOTIATED -6002 Functional unit not negotiated
ACCESS-INCNSTNT -6003 Requested access inconsistent with negotiated
functional units
ACCESS-NOT-AVAIL -6004 File access not requested