OSI/FTAM Programming Reference Manual

ISO FTAM Diagnostic Messages
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
C-2
This appendix provides a series of tables listing the messages specified by the ISO
8571 standard. The messages are grouped according to the FTAM function in progress
when the error condition arises. For more information about these diagnostic
messages, consult the documentation for the FTAM responder implementation in
question. For the structures related to diagnostic messages, see ZFTM-DDL-DIAG-
ELEM on page A-27, ZFTM-DDL-DIAGNOSTIC on page A-28, and ZFTM-DDL-
ENTITY-REF on page A-28.
Table C-1. Error Types
Constant
(ZFTM-VAL-DIAG-)
Error
Type
Value Error Type Meaning
INFORMATIVE 0 An error message that does not affect the current state
of the file service and does not require any recovery.
TRANSIENT 1 An error that indicates that the failure of the operation
being performed cannot recur if the sequence is
repeated.
PERMANENT 2 An error condition that indicates that the failure of at
least the present operation is likely to occur every time
the sequence of events is repeated.
Table C-2. Observers and Sources of Errors
Constant
(ZFTM-VAL-
ENTITYREF) Value Description Qualification
NOCATPOSS 0 No categorization possible Source only
INITFSRVUSR 1 Initiating file-service user (user
application)
INITFPMCH 2 Initiating file-protocol machine (initiator)
SRVFPMCH 3 Service supporting the file-protocol
machines (local or remote OSI services)
Source only
RESFPMCH 4 Responding file-protocol machine
(responder)
RESFSRVUSR 5 Responding file-service user (file system)