OSI/FTAM Programming Reference Manual

FTM Procedures
HP NonStop OSI/FTAM Programming Reference Manual—528611-001
4-5
Procedure Calls and Parameters
FTM_CANCEL_CNF_ Output Optional
FTM_CANCEL_IND_ Output Optional
FTM_CHANGE_ATTRIB_CNF_ Output Optional
FTM_CHANGE_ATTRIB_REQ_ Output Optional
FTM_CLOSE_CNF_ Output Optional
FTM_CREATE_CNF_ Output Optional
FTM_DATA_END_IND_ Output Optional
FTM_DATA_END_REQ_ Input Optional
FTM_DELETE_CNF_ Output Optional
FTM_DESELECT_CNF_ Output Optional
FTM_ERASE_CNF_ Output Optional
FTM_FILE_CLOSE_CNF_ Output ZFTM-DDL-
DIAGNOSTIC
Optional
FTM_FILE_OPEN_CNF_ Output Optional
FTM_INITIALIZE_CNF_ Output Optional
FTM_LOCATE_CNF_ Output Optional
FTM_OPEN_CNF_ Output Optional
FTM_P_ABORT_IND_ Output Optional
FTM_READ_ATTRIB_CNF_ Output Optional
FTM_SELECT_CNF_ Output Optional
FTM_TRANSFER_END_CNF_ Output Optional
FTM_U_ABORT_IND_ Output Optional
FTM_U_ABORT_REQ_ Input Optional
fadu-id FTM_ERASE_REQ_ Input ZFTM-DDL-FADU-ID Required
FTM_LOCATE_REQ_ Input Required
FTM_READ_REQ_ Input Required
FTM_WRITE_REQ_ Input Required
FTM_LOCATE_CNF_ Output Optional
fadu-
operation
FTM_WRITE_REQ_ Input INT(32) Required
file-
attrib
FTM_READ_ATTRIB_CNF_ Output ZFTM-DDL-READ-ATTR Optional
filename FTM_FILE_OPEN_REQ_ Input ZAPS-DDL-CHAR128 Required
FTM_SELECT_REQ_ Input Required
FTM_FILE_OPEN_CNF_ Output Optional
FTM_SELECT_CNF_ Output Optional
Table 4-1. FTM Procedure Parameters and Associated Calls (page 3 of 5)
Parameter Procedure Calls
Input
or
Output Data Type Parameter