OSI/MHS Administrative Utility (AU) Manual

OSI/MHS Administrative Utility (AU) Manual—424826-001
v
About This Manual
The Compaq OSI/MHS Administrative Utility (AU) allows you to obtain information
about messages, reports, or probes in the form of Protocol Data Units (PDUs). You
access the AU interface by using a World Wide Web browser. This version of the AU
works under HTML version 2.0; if your browser does not support this version, some
variation in formatting may result.
This manual describes how to install and configure the AU, and it is intended for the
people responsible for planning, installing, configuring, running, and operating the AU
on a Compaq OSI/MHS subsystem.
Section 1, Introducing the Administrative Utility
, describes the AU design and
implementation.
Section 2, Installing and Configuring the Administrative Utility
, describes how you
install the AU for a Compaq OSI/MHS subsystem.
Section 3, Using the Administrative Utility
, describes how to navigate within the AU,
how you use the features offered on each of the AU screens, and how you use the AU to
perform a variety of functions on PDUs.
Appendix A, Recommended Settings for Your Browser
, provides information about
setting up your browser for best viewing of the AU screens.
Related Manuals
This manual is one in a set of OSI/MHS manuals. The list below describes each of the
other manuals as shown in Figure i in this section.
•
OSI/MHS Orientation Guide describes common tasks involved in building message
handling systems with Compaq products. It also helps you to find related
information in other Compaq manuals and educational offerings.
•
OSI/MHS Gateway Programmatic Interface (GPI) Programming Guide contains
information for TAL and C programmers on how to use the Compaq OSI/MHS GPI
product effectively.
•
OSI/MHS Gateway Programmatic Interface (GPI) Reference Manual contains
reference information for C and TAL programmers using the GPI library procedures.
•
OSI/MHS P7 Application Programmatic Interface (P7 API) Manual contains
programming and reference information for C and TAL programmers who use the
P7 API procedures.
•
OSI/MHS Configuration and Management Manual describes how to plan, install,
configure, manage, and maintain a Compaq OSI/MHS subsystem.
•
Operator Messages Manual describes system messages and explains possible causes
of each message, discusses each error’s effect on the system, and suggests corrective
actions.