OSI/MHS Configuration and Management Manual

Installing Your OSI/MHS Subsystem
OSI/MHS Configuration and Management Manual—424827-003
4-13
Starting the Installation Procedure
If your response is yes, the following message is displayed.
You can then edit the installation file to reflect your subsystem setup and the
operations you want the system to perform. The installation procedure verifies the
keywords and displays their values on the screen. Next, the following question is
displayed.
TMF is required, so answer yes. The system verifies that TMF is running and then
asks the following question.
If your response is no, the system skips a warning about MS database conversion and
a question about NonStop SQL. The next display to appear starts with the following
text.
This display is described below.
If your response to “Are MS groups to be installed?” is yes, the following warning is
displayed. The warning applies only to upgrades; you can ignore it for a first-time
installation. Press RETURN to continue.
The following question is asked.
Prototype installation created in file "<inst-file>".
-> Please edit this installation file and then run "mhsinst" again.<-
(You can use "mhsinst instfile <inst-file> "
to re-run the installation.)
Exiting mhsinst
Is TMF configured and running? [y]
Are MS groups to be installed? [y]
If you respond "yes" to the next question, some first time
installation values will be selected...
Warning: MS databases for OSI/MHS D22 versions are
incompatible with D20 or D21 versions, which
must be converted. This is achieved by
executing the MS Database Conversion step.
Migration from C31 to D22 conversion is NOT supported.
Migration from D20 to D22 conversion is required.
Migration from D21 to D22 conversion is required.
MS Database Conversion will not purge existing files
unless directed to.
Is NonStop SQL installed? [y]