OSI/MHS Configuration and Management Manual

Installing Your OSI/MHS Subsystem
OSI/MHS Configuration and Management Manual—424827-003
4-16
Description of the Installation in Progress
items 8 and 25, enter those item numbers, separated by a comma, after the prompt.
Press RETURN to continue.
The installation program displays the value for item 8 and asks you if it is correct. If
you answer no, the installation program prompts you to change the value. Enter a
new value and press RETURN to continue.
Item 25 is a yes or no item. In this example, it is set to yes. Change the value to no,
then press RETURN to continue.
After you have finished making your changes, the installation menu reappears. If the
menu settings are acceptable, answer yes to the question:
Answering no indicates that the settings are not acceptable; the dialog described
above is repeated.
Description of the Installation in Progress
When you are satisfied with the values that you specified, answer yes to the question
at the bottom of the installation menu. The installation procedure continues, describing
each step in turn and asking for information or confirmation when necessary.
Please choose one or more items from the menu above to verify
and optionally change.
Please enter a number, a comma separated list of numbers, or one
of the words "none" or "all": 8,25
8) OSI/MHS Distribution List File Name is set to $myvol.zmhsdb.dl
Is "$myvol.zmhsdb.dl" correct? [n]
Alter OSI/MHS User File Name: $myvol.zmhsdb.dlt
25) Create GI Databases (PDU Stores)? [n]
Is this what you want "mhsinst" to do? [y]
Note. The number associated with each option has no meaning for the installation; the
numbers are here only for your convenience in locating items on the installation menu.