OSI/MHS Configuration and Management Manual

About This Manual
OSI/MHS Configuration and Management Manual424827-003
xx
Related Manuals
Introduction to Networking for HP NonStop Himalaya NS-series Servers. This
manual provides an overview of networking and data communications products for
NS-series servers.
SCF Reference Manual for G-Series RVUs. This manual describes the operation
of SCF and tells system and network managers how to use SCF to configure,
control, and inquire about data communications subsystems running on G-series
systems.
SCF Reference Manual for H-Series RVUs. This manual describes the operation of
SCF and tells system and network managers how to use SCF to configure, control,
and inquire about data communications subsystems running on H-series systems.
For information specific to OSI/MHS, you may want to read the following manuals:
OSI/MHS Configuration and Management Manual describes how to plan, install,
configure, manage, and maintain a OSI/MHS subsystem.
OSI/MHS Management Programming Manual. This manual describes how to write
management programs that control and monitor the OSI/MHS subsystem.
OSI/MHS SCF Reference Manual. This manual tells system and network
managers and operators how to use SCF commands to install, control, and inquire
about the OSI/MHS subsystem. This manual also contains PTrace information and
descriptions of attributes and screen displays.
For information on event and problem management, you can read the following
manuals:
PTrace Reference Manual. This manual tells system and network managers how to
display trace files created by the SCF TRACE command.
Event Management Service (EMS) Manual. This manual tells system and network
managers how to write event-message filters to select event messages of
particular interest, and how to distribute event messages to various destinations.
Operator Messages Manual. This manual describes system messages and
provides explanations of possible causes, a discussion of the effect on the system,
and suggestions for corrective action.