OSI/MHS Configuration and Management Manual

Managing Your OSI/MHS Subsystem
OSI/MHS Configuration and Management Manual—424827-003
7-15
Verifying the APPL, MTA, and ROUTE Objects
The INFO MTA command displays the following screen.
The INFO MTA command shows all the MTA objects defined for a subsystem.
The NAMES MTA command shows all the MTA and ROUTE objects defined for a
subsystem, as displayed on the following screen.
MHS1 has two adjacent MTA objects defined: MTA2 and MTA3. For further
information about a specific MTA, enter:
INFO MTA $MHS1.#MTA2, DETAIL
This command displays details about MTA2. The following screen shows an INFO
MTA command entered for MTA2, for MTA3, and then for itself, MTA1. These
commands show the OSI addresses associated with the adjacent MTAs, which are
described in Maintaining the Interfaces to OSI/AS
on page 7-20 These commands
also show O/R names and other information, such as country name (US), remote
ADMD name (TELENET), and remote PRMD name (DEVICEIND).
-> info mta $mhs1.*
MHS info MTA
MTA Country-code MTA-name
MTA2 US MTA2
MHS info MTA
MTA Country-code MTA-name
MTA3 US MTA3
-> names mta $mhs1.*
MHS Names MTA \NEWYORK.*
MTA
MTA2
ROUTE
MTA2.PRIMARY1 MTA2.PRIMARY2 MTA2.PRIMARY3 MTA2.PRIMARY4
MTA
MTA3
ROUTE
MTA3.BACKUP1 MTA3.BACKUP2 MTA3.BACKUP3 MTA3.BACKUP4