OSI/MHS Configuration and Management Manual

Troubleshooting Your OSI/MHS Subsystem
OSI/MHS Configuration and Management Manual—424827-003
9-58
Problem Description
The LO process communicates through a programmatic interface with a customer or
third-party application running on a HP NonStop™ system. The P7 API application
runs on the same physical system as the OSI/MHS subsystem.
The LO and RS processes interface to the MS and MR process in the same manner.
They provide similar statistics, status, and trace information.
As with other types of interconnection problems, the most likely occurrence of a
problem is during association establishment, and the most likely causes are
configuration errors, but sometimes an operator action or a change in device status
can cause a failure during an association.