OSI/MHS Configuration and Management Manual

Troubleshooting Your OSI/MHS Subsystem
OSI/MHS Configuration and Management Manual—424827-003
9-65
Problem Example
4 encoding (CHOICE)
1 singleASN1Type (ANY)
msBindUAPFrag (CHOICE)
3 msBindErrorUAPParams (INTEGER)
0
12/15/94 16:15:47.259976 >000.016956 #10 MHSEPDUMAN
PDUID : MEMORY PDU
PDUSIZE : 12
PROTOCOL : ExternalFrag
OPERATION : ENCODE
000000: 28 0A 02 01 07 A0 05 B2 03 0A 01 00 ............
12/15/94 16:15:47.421353 >000.161377 #11 MHSRTS
Primitive : A_ASSOCIATE_RSP
Local address
PSEL: 4B52535053454C3141
SSEL: 4B52535353454C3141
TSEL: 51
NSAP: 51
Result : ZAPS_VAL_CON_REJECT_PERM
PDU Id = MEMORY PDU
--------------------------------------------
Context Control Block
Index : 0
State : ACTIVE
CEPI : 4294967286
IL Conn : 740184754 0
Layer : 4294967295
Entity : 0
PDU Id = 0 0-0-0-0-0
MoreData : FALSE
Offset : 0
bytesLeft : 0
End of Trace file.
The trace shows in record number 9 that the bind is being rejected with the error
msBindErrorUAPParams = 0. This error indicates an authentication failure. The O/R
name and credentials are checked by the RS process; if any part of the name or
credentials fails this check, then an authentication failure is returned. Check all O/R
attributes against the initiator's values. To see the initiator’s values, look at trace record
number 6 and give the INFO APPL command with the detail option: the values should
match. Here is an excerpt from the output of the INFO APPL command applied to user
UAMS19:
-> info appl $zk1.#uams19,detail
MHS Detailed info APPL UAMS19
GENERAL ATTRIBUTES:
Access-type...... MS
Access-name...... \CS7.MSGRP5
ORNAME ATTRIBUTES:
*ISO-Country-name. US
*ADMD............. POSTMASTER1
*PRMD............. DEVELOPMENT
*X121-Address..... *
*Terminal-ID...... *