OSI/MHS Configuration and Management Manual

Examples of Configuration Files
OSI/MHS Configuration and Management Manual—424827-003
A-24
OSI/AS and OSI/TS Configuration Command File for
MTA1
=============================================================
== ==
=============== Configure common PROCESS section ==========
== ==
=============================================================
ASSUME PROCESS $UOSI
== assign X.25 IOP
ADD #NSP.X25A, NAME $SX1
== Assign LAN IOP
ADD #NSP.LAM1, NAME $LAM1
== Define TSP
ADD #TSP.UTS1, NAME $UTS1, CPU 1, BACKUPCPU 0, CODEFILE TSPOBJ
== Define TAPS
ADD #TAPS.UAS1, NAME $UAS1, CPU 1, BACKUPCPU 0, &
CODEFILE TAPSOBJ
== Start TSP and TAPS
PARAM TSP^PROTO^ID ON
START PROCESS #TSP.UTS1
START PROCESS #TAPS.UAS1
=============================================================
== ==
=========== Configure the common PROFILE section ===========
== ==
=============================================================
== Define L4 profiles (class 0 for X.25, class 4 for LAN)
ASSUME PROFILE
ADD #L4.L4WAN, CLASS 0
ADD #L4.L4LAN, CLASS 4
=============================================================
== ==
================== Configure OSI addresses ================
== ==
=============================================================
== Local groups for MTA1 are:
== MRGRP1 and MRGRP2 X.25 normal mode
== MRGRP3 X.25 1980 mode
== MRGRP4 LAN
== RSGRP1 and RSGRP2 X.25 1980 mode
== RSGRP3 and RSGRP4 LAN