OSI/MHS Configuration and Management Manual

Examples of Configuration Files
OSI/MHS Configuration and Management Manual—424827-003
A-58
OSI/AS and OSI/TS Configuration Command File for
MTA3
=============================================================
ASSUME PROCESS $WOSI
== assign X.25 IOPs
ADD #NSP.X25A, NAME $SX1
== assign LAN IOP
ADD #NSP.LAM1, NAME $LAM1
== define TSP
ADD #TSP.WTS1, NAME $WTS1, CPU 1, BACKUPCPU 0, &
CODEFILE TSPOBJ
== define TAPS
ADD #TAPS.WAS1, NAME $WAS1, CPU 1, BACKUPCPU 0, &
CODEFILE TAPSOBJ
== Start TSP and TAPS
PARAM TSP^PROTO^ID ON
START PROCESS #TSP.WTS1
START PROCESS #TAPS.WAS1
=============================================================
== ==
========== Configure the common PROFILE section ===========
== ==
=============================================================
== define L4 profiles (class 0 for X.25, class 4 for LAN)
ASSUME PROFILE
ADD #L4.L4WAN, CLASS 0
ADD #L4.L4LAN, CLASS 4
=============================================================
== ==
============= Configure OSI addresses =====================
== ==
=============================================================
== Local groups for MTA3 are:
== MRGRP1 and MRGRP2 X.25 normal