OSI/MHS Gateway Programmatic Interface (GPI) Reference Manual

Return Codes
OSI/MHS Gateway Programmatic Interface (GPI) Reference Manual—522223-001
B-31
5007 ZGPI-RC-BAD-STRING-OFFSET
INVALID-PID 6004 GIP received request from process that is not
process that opened existing session.
UNKNOWN-GPI-REQUEST 6005 GIP received GPI request that is not
recognized.
OTT-FAILURE 6006 Object-tree-transport module failed during
start-transfer-in or transfer-out operation.
UNEXPECTED-OTT-REQ 6007 Object-tree-transport module made request
while GIP in the wrong state.
IPC-PROTOCOL-ERROR 6008 GPI request to GIP violates sequence of
events expected in interface protocol.
TMF-ERROR 6009 Attempt to begin, end, abort, or resume
transaction failed.
GIP-SEND-FAILURE 6010 GIP could not transfer communication to
MRP during transfer-out.
WAIT-CANCELLED 6011 GIP cancelled a wait request.
GIP-INTERNAL-ERROR 6012 Fatal internal error occurred in GIP.
GW-AUX-P-UNEXP-REPLY 6013 Gateway auxiliary process received
unexpected reply from WRITEREADX.
GW-AUX-PNAME-ERROR 6014 Gateway auxiliary process returned
unrecoverable error.
GW-PNAME-ERROR 6015 Gateway process returned unrecoverable error
in unit-of-work response.
PDU-FILE-INACCESSIBLE 6016 GIP was unable to access the PDU store
during a start-transfer-in operation.
PREVIOUS-OT-DELETED 6017 GIP deleted an object tree from memory.
ILLEGAL-WAIT-INTERVAL 6018 Interval specified for GPI_MT_WAIT_
procedure is invalid.
PDU-SUBSYS-INIT-ERROR 6019 Unrecoverable error occurred during
initialization of PDU store subsystem.
GW-DATABASE-OPEN-ERROR 6020 GIP cannot open gateway database file.
GW-DATABASE-READ-ERROR 6023 GIP cannot read gateway database file.
INVALID-GATEWAY-INFO 6024 Gateway database contains invalid data.
UNUSABLE-ADMIN-QUEUE 6025 All ADMIN queue entries contain MHS
manager name that is different from MHS
manager that started GIP.
MRP-NOT-COMPATIBLE 6026 Version of MHS-interface module not
compatible with MRP.
VERSION-CHECK-ERROR 6027 GIP could not check version of MHS-
interface module.
Table B-10. ZGPI-RC- Codes for GIP Errors (page 2 of 3)
Constant (ZGPI-RC-) Value Meaning