OSI/MHS Gateway Programmatic Interface (GPI) Reference Manual

Return Codes

OSI/MHS Gateway Programmatic Interface (GPI) Reference Manual—522223-001

B-49

8511 ZGPI-RC-UNREADABLE-PDU

Cause. The inbound-mapping module could not read the inbound PDU from the PDU

store.

Effect. The function is not performed.

Recovery. Call GPI_STATUS_ and check the information buffer. Take the recovery

action recommended for the error class.

8512 ZGPI-RC-UNSUPPORTED-BODY-PART

Cause. A body part has been encountered that is not supported by the GPI. The

secondary code contains the kind code of the unsupported body part.

Effect. The GPI decodes the entire message except the body part that is unsupported.

Recovery. You can process the message without the body part decoded, or you can

archive the message and analyze it using diagnostic tools.

Secondary Codes

Secondary codes provide detailed information about the conditions reported by codes

returned in the status and primary-code parameters.

Table B-13 through Table B-24 summarize the secondary code values you can receive

from a GPI procedure and explains what they mean. The second segment of the

secondary code prefix (following ZGPI-) indicates the return code that caused the

secondary codes, as follows:

FDC- OM-RC-FUNCTION-DECLINED

MIC- OM-RC-MEMORY-INSUFFICIENT

NSOC- OM-RC-NO-SUCH-OBJECT

PIC- OM-RC-POINTER-INVALID

SEC- OM-RC-SYSTEM-ERROR

TMVC- OM-RC-TOO-MANY-VALUES

WVNC- OM-RC-WRONG-VALUE-NUMBER

PEC- ZGPI-RC-PROTOCOL-ERROR

IRDC- ZGPI-RC-ILLEGAL-RECIPIENT-DR

WVMC- OM-RC-WRONG-VALUE-MAKEUP

NPC- OM-RC-NOT-PRESENT

IGIC- ZGPI-RC-INVALID-GATEWAY-INFO

PFIC- ZGPI-RC-PDU-FILE-INACCESSIBLE