OSI/MHS Management Programming Manual

Commands and Responses
OSI/MHS Management Programming Manual—424824-001
5-61
ADD CUGMEMBER
•
A domain name (Country, ADMD, and, optionally, PRMD)
•
A domain name plus an organization name
•
A domain name plus an organization name plus one organization unit name
•
A qualified mnemonic, numeric, or terminal O/R name as specified in the
CCITT X.402 recommendations
The O/R-name attributes specified for a CUGMEMBER object should conform to
one of the attribute sets listed above. Note that OSI/MHS does not validate that the
O/R name attributes of a CUGMEMBER object conform to one of these types.
The combinations of O/R name attributes for a CUGMEMBER object must be
unique within the parent CUG. However; the same combinations of attributes can
be duplicated across CUGs.
For descriptions of these attributes, see the descriptions provided in the ADD APPL
command for the ZMHS-DDL-APPL-ORNAME definition.
ZSPI-TKN-ALLOW-TYPE
ZSPI-TKN-RESPONSE-TYPE
ZSPI-TKN-COMMENT
are described in the SPI Programming Manual.
Tokens in Response Buffer
ZSPI-TKN-DATALIST
introduces a data list, as described in the SPI Programming Manual; the final
ZSPI-TKN-ENDLIST ends the data list. These tokens enclose the other response
tokens only if the value of the header token ZSPI-TKN-MAXRESP is not 0.
ZCOM-TKN-OBJTYPE
ZCOM-TKN-OBJNAME
are described in the SPI Common Extensions Manual.
ZSPI-TKN-RETCODE
ZSPI-TKN-ERRLIST
ZSPI-TKN-ENDLIST
ZSPI-TKN-CONTEXT
are described in the SPI Programming Manual.
Operational Notes
•
ADD CUGMEMBER is a sensitive command.
•
CUGMEMBER objects can be added at anytime to an operational OSI/MHS
subsystem. However, CUG checking is only done when the MR CLASS attribute
ZCUG-CHECK is set to ALL. See the description of the CUG-CHECK attribute in
the ADD CLASS command for more information.