OSI/MHS Management Programming Manual

Commands and Responses
OSI/MHS Management Programming Manual—424824-001
5-77
ADD GROUP
ZMRP-PRI
is the priority at which the MRP process will run. The maximum value is the
MHS manager priority minus 1. If the null value is detected, the default value
for the group is used. The SPI-NULL value for this field is 255.
ZRTS-PNAME
specifies the process name of the RTS process within this group. This process
must reside on the same node as the MHS manager. The SPI-NULL value for
this field is 0.
ZRTS-CPU
is the CPU on which the RTS process will run. No range checking is
performed. However, this value should not exceed the number of CPUs on the
target system minus one (for example, a value in the range 0 to 7 for an
eight-CPU system). If the null value is detected, the default value for the group
is used. The SPI-NULL value for this field is 255.
ZRTS-BACKUP
is the backup CPU the RTS process will use. No range checking is performed.
However, this value should not exceed the number of CPUs on the target system
minus one (for example, a value in the range 0 to 7 for an eight-CPU system). If
the null value is detected, the default value for the group is used. The SPI-
NULL value for this field is 255.
ZRTS-PRI
is the priority at which the RTS process will run. The maximum value is the
MHS manager priority minus 1. If the null value is detected, the default value
for the group is used. The SPI-NULL value for this field is 255.
ZSC-PNAME
is the name of the store cleaner process within this group. This process must
reside on the same node as the MHS manager. The SPI-NULL value for this
field is 0.
ZSC-CPU
is the CPU on which the store cleaner process will run. No range checking is
performed. However, this value should not exceed the number of CPUs on the
target system minus one (for example, a value in the range 0 to 7 for an
eight-CPU system). If the null value is detected, the default value for the group
is used. The SPI-NULL value for this field is 255.
ZSC-BACKUP
is the backup CPU the store cleaner process will use. No range checking is
performed. However, this value should not exceed the number of CPUs on the
target system minus one (for example, a value in the range 0 to 7 for an