OSI/MHS Management Programming Manual

Commands and Responses
OSI/MHS Management Programming Manual—424824-001
5-94
ADD MTA
ZSTRING
is the SSEL part of the address. This is a hexadecimal string of the length
specified in ZLENGTH.
ZREMTSELECTOR1...7
is the TSEL part of the MTA’s OSI address. This field identifies a transport
layer entity. If you specify the attribute name without any characters in the
address, this part of the address is unused. Each ZREMTSELECTOR token
contains the following fields:
ZLENGTH
is the length of the address in bytes. This value must be an even number in
the range 0 through 64.
ZSTRING
is the TSEL part of the address. This value is a hexadecimal string of the
length specified in ZLENGTH.
ZREMNSAP1...7
is the NSAP part of the MTA’s OSI address. This field identifies a network
layer entity. If you specify the attribute name without any characters in the
address, this part of the address is unused. Each ZREMNSAP token contains the
following fields:
ZLENGTH
is the length of the address in bytes. This value must be an even number in
the range 0 through 40.
ZSTRING
is the NSAP part of the address. This value is a hexadecimal string of the
length specified in ZLENGTH.
Note that if the communication with the remote MTA is over X.25 (1980),
you must enter the ASCII equivalent of the DTE address of the remote MTA
in this field (for example, if the DTE address is 12345, enter 3132333435),
and you must configure the OSI services so that a mapping exists between
this NSAP and the real DTE address.
ZLOCPSELECTOR1...7
is the PSEL part of the OSI address for OSI/MHS. This field identifies a
presentation layer entity. If you specify the attribute name without any
characters in the address, this part of the address is unused. Each
ZLOCPSELECTOR token contains the following fields: