OSI/MHS Management Programming Manual

Event Messages
OSI/MHS Management Programming Manual—424824-001
6-10
2: ZMHS-EVT-INTL-WARN
ZMHS-TKN-UNIQUE-ID
identifies the error within a module in OSI/MHS.
ZMHS-TKN-SUBCODE
is the error subcode. It is an optional token. Up to four subcodes can be specified
and displayed. The additional subcodes appear in positions <8>, <9>, and <10>.
ZMHS-TKN-XFNAME
is an optional token representing the name of a file involved in the error. The
maximum length is 256 bytes.
ZMHS-TKN-PDUID
is an optional token representing the PDU store identifier for the message involved
in this event. This is an internal token for the Compaq support representatives’ use.
If this token is present, the message “,PDU tokens: pdu-id”” appears in the event-
message text.
ZEMS-TKN-EMPHASIS
has the value ZSPI-VAL-FALSE, indicating that this is not a critical event.
ZEMS-TKN-CONSOLE-PRINT
has the value ZSPI-VAL-TRUE.
Cause. OSI/MHS or GIP detected an internal warning.
Recovery. For error codes ZGPI-VAL-BUFFER-INIT-ERROR through ZGPI-VAL-
SIGNALTIMEOUT-ERROR, contact your Compaq support representative and provide
all relevant information as follows:
•
A copy of the EMS log
•
A copy of the SCF configuration file
•
VPROCs for all the OSI/MHS processes
•
If a protocol data unit (PDU) is named in the message, information about the remote
message transfer agent (MTA) or user agent (UA) that originated the PDU. (The
PDU is named in the message only if the internal warning was reported by the GPI.)
If your local operating procedures require contacting the Compaq NonStop Support
Center (TNSC), supply your system number and the numbers and versions of all related
products as well.
No recovery is required for the other error codes.
Consideration
This event message is reported to the primary collector.