OSI/MHS Management Programming Manual

Event Messages
OSI/MHS Management Programming Manual—424824-001
6-85
22: ZMHS-EVT-BAD-OSI-CONFIG
ZMHS-TKN-REM-OSI-DATA
has the value ZSPI-VAL-TRUE if the remote OSI address tokens are present,
ZSPI-VAL-FALSE if the remote OSI address is not present.
ZMHS-TKN-LOC-NSAP
is the local OSI NSAP; maximum length is 40 characters.
ZMHS-TKN-LOC-TSEL
is the local OSI TSEL; maximum length is 64 characters.
ZMHS-TKN-LOC-SSEL
is the local OSI SSEL; maximum length is 32 characters.
ZMHS-TKN-LOC-PSEL
is the local OSI PSEL; maximum length is 32 characters.
ZMHS-TKN-REM-NSAP
is the remote OSI NSAP address; maximum length is 40 characters.
ZMHS-TKN-REM-TSEL
is the remote OSI TSEL; maximum length is 64 characters.
ZMHS-TKN-REM-SSEL
is the remote OSI SSEL; maximum length is 32 characters.
ZMHS-TKN-REM-PSEL
is the remote OSI PSEL; maximum length is 32 characters.
ZMHS-TKN-ERROR-DATA
has the value ZSPI-VAL-TRUE if the first error information is present, ZSPI-VAL-
FALSE if the first error info is not present.
ZMHS-TKN-FIRST-DEVICE
is the fully qualified device name on which the first error in the current error
situation occurred. It is only present if the token ZMHS-TKN-ERROR-DATA has
the value ZSPI-VAL-TRUE.
ZMHS-TKN-FIRST-CODE
is the first error that occurred on the device named in the token ZMHS-TKN-FIRST-
DEVICE in the current error situation. It is only present if the token ZMHS-TKN-
ERROR-DATA has the value ZSPI-VAL-TRUE.