OSI/MHS Management Programming Manual

Event Messages
OSI/MHS Management Programming Manual—424824-001
6-89
23: ZMHS-EVT-BAD-OSI-RESOURCE
ZMHS-TKN-API-CALL
is the OSI/AS procedure call used; maximum length is 24 bytes.
ZMHS-TKN-API-FILENAME
is the name of the OSI/AS TAPS device used. It has the same format as
ZAPS-DDL-FILENAME.
ZEMS-TKN-ACTION-NEEDED
is set to TRUE except when retries are done on the local OSI address for the process.
In this case the token is set to TRUE when the condition starts and set to FALSE
when the condition ends.
ZEMS-TKN-EMPHASIS
has the value ZSPI-VAL-FALSE, indicating that this is not a critical event.
ZEMS-TKN-CONSOLE-PRINT
has the value ZSPI-VAL-TRUE.
ZMHS-TKN-LOC-OSI-DATA
has the value ZSPI-VAL-TRUE if the local OSI address tokens are present,
ZSPI-VAL-FALSE if the local OSI address is not present.
ZMHS-TKN-REM-OSI-DATA
has the value ZSPI-VAL-TRUE if the remote OSI address tokens are present,
ZSPI-VAL-FALSE if the remote OSI address is not present.
ZMHS-TKN-LOC-NSAP
is the local OSI NSAP; maximum length is 40 characters.
ZMHS-TKN-LOC-TSEL
is the local OSI TSEL; maximum length is 64 characters.
ZMHS-TKN-LOC-SSEL
is the local OSI SSEL; maximum length is 32 characters.
ZMHS-TKN-LOC-PSEL
is the local OSI PSEL; maximum length is 32 characters.
ZMHS-TKN-REM-NSAP
is the remote OSI NSAP address; maximum length is 40 characters.