OSI/MHS Management Programming Manual

Event Messages
OSI/MHS Management Programming Manual—424824-001
6-90
23: ZMHS-EVT-BAD-OSI-RESOURCE
ZMHS-TKN-REM-TSEL
is the remote OSI TSEL; maximum length is 64 characters.
ZMHS-TKN-REM-SSEL
is the remote OSI SSEL; maximum length is 32 characters.
ZMHS-TKN-REM-PSEL
is the remote OSI PSEL; maximum length is 32 characters.
ZMHS-TKN-ERROR-DATA
has the value ZSPI-VAL-TRUE if the first error information is present, ZSPI-VAL-
FALSE if the first error info is not present.
ZMHS-TKN-FIRST-DEVICE
is the fully qualified device name on which the first error in the current error
situation occurred. It is only present if the token ZMHS-TKN-ERROR-DATA has
the value ZSPI-VAL-TRUE.
ZMHS-TKN-FIRST-CODE
is the first error that occurred on the device named in the token ZMHS-TKN-FIRST-
DEVICE in the current error situation. It is only present if the token ZMHS-TKN-
ERROR-DATA has the value ZSPI-VAL-TRUE.
ZMHS-TKN-FIRST-SUBCODE
further describes ZMHS-TKN-FIRST-ERROR. It is only present if the token
ZMHS-TKN-ERROR-DATA has the value ZSPI-VAL-TRUE.
ZMHS-TKN-DEVICE-DATA
has the value ZSPI-VAL-TRUE if the device information is present, ZSPI-VAL-
FALSE if the device info is not present.
ZMHS-TKN-FSYS-ERROR
is only present if the token ZMHS-TKN-DEVICE-DATA has a value of ZSPI-VAL-
TRUE. It is the file system error code that was received by X25AM or TLAM,
whichever is being used to provide the lower comm layers.
ZMHS-TKN-CONNECT-INFO
is only present if the token ZMHS-TKN-DEVICE-DATA has a value of ZSPI-VAL-
TRUE. It has the value ZMHS-VAL-CONNECT-INFO-X25 if the error occurred on
an X25 connection, ZMHS-VAL-CONNECT-INFO-LAN if the error occurred on a
LAN connection.