OSI/MHS Management Programming Manual

Password Server Interfaces
OSI/MHS Management Programming Manual—424824-001
7-14
Command and Response Tokens
For all of the operations in Table 7-4, the reply contains the token zmhs-map-passw-
status, which indicates the result of the operation.
ZMHS-MAP-APPL-NAME
defines the APPL object for which the reque, “Commands and Responses,” for a
detailed description of the APPLNAME token. The ZMHS-MAP-APPL-NAME
token consists of the following:
ZMHS-MAP-PASSW
defines a password. This token is optional. Its value depends on the value of
ZMHS-MAP-PASSW-COMMAND.ZVALUE. Table 7-5 shows what these
values mean.
ZLENGTH
defines the length of the password.
ZSTRING
defines the password itself.
DELETE A DELETE MS
APPL operation
The ZMHS-MAP-APPL-ORNAME token is
required and contains the O/R name of the
APPL object.
BIND An MS bind
operation
The ZMHS-MAP-UA-OSI-ADDRESS token
is optional and contains the OSI address of
UAs attempting the bind operation over the
OSI services. This token is not present for co-
located UAs attempting a bind using a
programmatic interface.
The ZMHS-MAP-PASSW token is required
and has the value of the password supplied in
the USER-PASSWORD attribute.
REGISTER A register-MS
operation
The ZMHS-MAP-PASSW token is required
and contains the new password being
proposed.
The ZMHS-MAP-OLD-PASSW token is
required and contains the old (current)
password.
Table 7-4. ZVALUE Descriptions (page 2 of 2)
If the ZMHS-MAP-
PASSW-COMMAND
token contains the
value ZMHS-VAL-
PASSW-MS-
Then this is a
result from... And...