OSI/MHS Management Programming Manual

Password Server Interfaces
OSI/MHS Management Programming Manual—424824-001
7-52
MPS Error and Informational Messages
Cause. This message reports a process or device-related I/O problem.
Effect. It is fatal and causes the MPS to ABEND.
Recovery. This message should never occur in normal operation. If you are using the
MPS unmodified (as delivered from Compaq), contact your Compaq representative with
information about your configuration and the circumstances of the error.
Cause. This message reports a process or device-related I/O problem.
Effect. It is fatal and causes the MPS to ABEND.
Recovery. This message should never occur in normal operation. Contact your
Compaq representative with information about your configuration and the circumstances
of the error.
Cause. This message reports a process or device-related I/O problem.
Effect. It is fatal and causes the MPS to ABEND.
Recovery. This message should never occur in normal operation. Contact your
Compaq representative with information about your configuration and the circumstances
of the error.
Cause. This message reports a problem with a configuration parameter value specified
on startup of the MPS.
Effect. “Encrypting using 0” means that passwords will be written to the databases
without encryption.
Recovery. Correct the configuration parameter value that is in error and restart or
reconfigure the MPS.
Cause. This message reports an I/O problem with the configuration database. The I/O
function, the file name, and the file-system error number are reported in the message.
*** ERROR *** READUPDATE failed with error <value>
*** ERROR *** READUPDATE on $RECEIVE returned error <value>
*** ERROR *** REPLY on $RECEIVE returned error <value>
*** ERROR *** Unsupported encryption method, encrypting
using 0
*** ERROR *** Update of MPS-CONF-DB <name> failed with
error <value>