OSI/MHS Management Programming Manual

Password Server Interfaces
OSI/MHS Management Programming Manual—424824-001
7-58
MPS Error and Informational Messages
Cause. A process attempted to open the MPS more than once.
Effect. The MPS rejects the open attempt but continues to accept requests normally
through all its other opens.
Recovery. Attempt to locate the source of the invalid request and remove it. If
necessary, change the code of the MPS to report the process ID of the process that is the
source of the messages.
Cause. This message reports an error on awaiting completion of an I/O operation on a
process (MHSMGR or MS) or of a CONTROL 27 (Wait for Disk File Write) operation
on the configuration database.
Effect. The MPS process attempts to continue operation, unless this warning occurs in
connection with errors that cause it to ABEND.
Recovery. Review the file-system error number reported in the message and attempt to
identify the problem. Refer to the Guardian Procedure Errors and Messages Manual
for information about file-system errors.
Cause. This message reports a possible error in the MPS code. It is unlikely to occur if
you use the MPS without modification.
Effect. The MPS process rejects the request and attempts to continue operation.
Recovery. Inform your Compaq representative if you are using the unmodified MPS as
delivered by Compaq. Provide configuration information and, if possible, information
about the type of operation being requested. If you have modified the MPS program,
study it for errors in processing SPI messages.
Cause. This message reports a possible error in the MPS code. It is unlikely to occur if
you use the MPS without modification.
Effect. The MPS process rejects the request and attempts to continue operation.
Recovery. Inform your Compaq representative if you are using the unmodified MPS as
delivered by Compaq. Provide configuration information and, if possible, information
*** warning *** Attempt to OPEN MPS twice was rejected
*** warning *** AWAITIOX received error <value> on file number
<value>
*** warning *** Couldn't get value of USEDLEN token from reply
buffer
*** warning *** Couldn't initialise PASSW-STATUS token for
reply