OSI/MHS Management Programming Manual

Password Server Interfaces
OSI/MHS Management Programming Manual—424824-001
7-59
MPS Error and Informational Messages
about the type of operation being requested. If you have modified the MPS program,
study it for errors in processing SPI messages.
Cause. This message reports a possible error in the MPS code. It is unlikely to occur if
you use the MPS without modification.
Effect. The MPS process rejects the request and attempts to continue operation.
Recovery. Inform your Compaq representative if you are using the unmodified MPS as
delivered by Compaq. Provide configuration information and, if possible, information
about the type of operation being requested. If you have modified the MPS program,
study it for errors in processing SPI messages.
Cause. This message reports a possible error in the MPS code. It is unlikely to occur if
you use the MPS without modification.
Effect. The MPS process rejects the request and attempts to continue operation.
Recovery. Inform your Compaq representative if you are using the unmodified MPS as
delivered by Compaq. Provide configuration information and, if possible, information
about the type of operation being requested. If you have modified the MPS program,
study it for errors in processing SPI messages.
Cause. This message reports a possible error in the MPS code. It is unlikely to occur if
you use the MPS without modification.
Effect. The MPS process rejects the request and attempts to continue operation.
Recovery. Inform your Compaq representative if you are using the unmodified MPS as
delivered by Compaq. Provide configuration information and, if possible, information
about the type of operation being requested. If you have modified the MPS program,
study it for errors in processing SPI messages.
Cause. This message reports that an attempt was made to alter a configuration
parameter value that is not allowed to be altered at this time. A NORMAL or
POPULATE mode MPS does not alter the parameters in the configuration database
unless it is the first process to run and is therefore creating the database.
*** warning *** Couldn't initialise reply buffer
*** warning *** Couldn't put PASSW-STATUS token in reply
buffer
** warning *** Couldn't put RETCODE token in reply buffer
** warning *** Illegal attempt to alter PARAM <name> from
<value> to <value>