OSI/MHS Management Programming Manual

Common Definitions
OSI/MHS Management Programming Manual—424824-001
4-9
Summary States
Summary States for APPL Objects
The following states apply to MHS APPL processes.
Summary States for CLASS Objects
The following states apply to MHS CLASS processes.
Summary States for GROUP Objects
The following states apply to MHS GROUP processes.
ZCOM-VAL-SUMSTATE-STARTED The process is running and will accept new
requests for connections.
ZCOM-VAL-SUMSTATE-STOPPED The process exists in the subsystem
configuration but is not running.
ZCOM-VAL-SUMSTATE-SUSP The process is running but will not accept
new requests for connections. If the process
is in the SUSP (suspended) state, it cannot
communicate with other MHS processes.
ZCOM-VAL-SUMSTATE-STARTED The process is running and will accept new
requests for connections.
ZCOM-VAL-SUMSTATE-STOPPED The process exists in the subsystem
configuration but is not running.
ZCOM-VAL-SUMSTATE-STOPPING The process is in transition to the STOPPED
state because a STOP command was issued
for that process. The process is running but
will not accept new requests for connections.
ZCOM-VAL-SUMSTATE-STARTED The process is running and will accept new
requests for connections.
ZCOM-VAL-SUMSTATE-STARTING The process is in transition to the STARTED
state. New requests for connections are not
accepted until the process is in the
STARTED state.
ZCOM-VAL-SUMSTATE-STOPPED The process exists in the subsystem
configuration but is not running.
ZCOM-VAL-SUMSTATE-STOPPING The process is in transition to the STOPPED
state because a STOP command was issued
for that process. The process is running but
will not accept new requests for
connections.