OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-63
ADD GROUP Command
object served by this MS group is added, altered, or deleted. The process specified
in this attribute must reside on the same node as the MHS manager.
MS-CPU
specifies the CPU in which the MS process is to run. This attribute is optional; if
you omit it, the default CPU for the group is assumed. No range checking is done;
however, the maximum value of cpu-number should not exceed the number of
CPUs on the target system (for example, 0 to 7 on an eight-CPU system).
MS-PNAME
specifies the process name of the MS process within this group. mhs-proc-name
must be entered as $proc.#pname. The node name cannot be specified. The
process must reside on the same node as the MHS manager.
MS-PRI
specifies the priority at which the MS process is to run. The maximum value is the
priority of the MHS manager minus 1. If you do not specify this value, the default
value for the group is used.
MSG-STORE-SV
specifies the name of the subvolume this MS group is to use for its SQL databases.
It consists of the node, volume, and subvolume. The subvolume name must be
present; if the node name and volume name are not present, the current defaults are
used. The remainder of the file name is blank-filled. The node name must be the
same as the group node name.
The additional attribute-spec for the ADD GROUP command when the class is
RS is one of the following attribute name and value combinations:
RS-BACKUP
specifies the backup CPU in which the RS process is to run. This attribute is
optional; if you omit it, the backup CPU for the group is assumed. No range
checking is done; however, the maximum value of cpu-number should not
exceed the number of CPUs on the target system minus one (for example, 0 to 7 on
an eight-CPU system).
[ RS-BACKUP cpu-number ]
[ RS-CPU cpu-number ]
RS-NSAP hex-character-string
[ RS-P-SELECTOR [ hex-character-string ] ]
RS-PNAME mhs-proc-name
[ RS-PRI integer ]
[ RS-S-SELECTOR [ hex-character-string ] ]
[ RS-T-SELECTOR [ hex-character-string ] ]