OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-77
ADD ROUTE Command
ISO-COUNTRY-NAME
specifies the country name. The default value is the wild card. The length of the
value is 2 characters. If the ADMD name is present (that is, not an asterisk (*)), then
the ISO-COUNTRY name must also be present; otherwise, this route cannot be
accessed.
NUMERIC-USER-IDENTIFIER
specifies the numeric user identifier. This value has a maximum length of 32
numeric characters. OSI/MHS supports both partial wild-carding and full wild-
carding of this attribute. For details, see Wild-Card Notation in ROUTE and APPL
X.121 Addresses and Numeric User Identifiers on page 1-11 of this manual.
ORG-NAME
specifies the organization name. This value has a maximum length of 64
alphanumeric characters. The default value is the wild card.
ORG-UNIT-(1-4)
specifies the organizational unit name. This value has a maximum length of 32
alphanumeric characters. You can specify a wild card for this value. The default
value is the wild card.
PRI
specifies the route priority. This value is in the range 1 through 99. The highest
priority is 1.
PRMD
specifies the private management domain name. You can specify a valid domain
name or a wild card. This value has a maximum length of 16 alphanumeric
characters.
SUR-NAME
specifies the surname (last name) of the personal name set. This value has a
maximum length of 40 alphanumeric characters. You can specify a wild card for
this value. The default value is the wild card.
TERMINAL-ID
specifies the terminal identifier. This value has a maximum length of 24
alphanumeric characters. The default value is the wild card.
TERMINAL-TYPE
specifies the terminal type. The default value is the wild card.