OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands

OSI /MHS SCF Reference Manual—424828-001

2-95

ALTER MON Command

The ALTER MON command changes the attributes of the MON object. The MON

attributes can be altered when the MON object is in the STARTED state (unlike all other

objects, which must be in the STOPPED state to be altered). This is a sensitive

command.

OUT file-spec

directs any SCF output generated for this command to the specified file.

[\psystem.]$proc

is the name of the MON object to be altered.

attribute-spec

is a specification of an attribute and a value to be assigned to it.

The attribute-spec is a combination of the following attribute name and value

combinations:

BACKUP-CPU

specifies the CPU in which the backup manager process is to run. If the backup is

running in another CPU, it will be stopped and started in the other CPU. If you

specify -1, the backup process, if one exists, is stopped. This value is in the range -1

through 15.

BACKUP-DEBUG

specifies whether the backup manager process is started in DEBUG when it is next

initialized. This attribute should be used only by Compaq analysts in problem-

solving situations. The default is OFF.

COLLECTOR-1

specifies the alternate collector for accounting. This attribute can be altered only if

the SUBSYS object is in the STOPPED state.

ALTER [ / OUT file-spec / ] MON [\psystem.]$proc

[ , attribute-spec ]...

[ BACKUP-CPU integer ]

[ BACKUP-DEBUG { ON | OFF } ]

[ COLLECTOR-1 process-name ]

[ DEBUG-ON-ERR { ON | OFF } ]

[ EMS-PNAME process-name ]

[ LOG-FNAME file-name ]

[ MSG-FNAME file-name ]