OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-100
DELETE Command
DELETE Command
The DELETE command removes an object from the OSI/MHS subsystem configuration.
You can use the DELETE command to remove the APPL, CLASS, CUG,
CUGMEMBER, DLIST, DLISTMEMBER, GATEWAY, GROUP, MTA, ROUTE, and
SUBSYS objects from the OSI/MHS subsystem. This is a sensitive command.
OUT file-spec
directs any SCF output generated for this command to the specified file.
object-spec
is the name of the object to be deleted. The object-spec for the DELETE
command is one of the following:
SUB [ ALL | NONE | ONLY ]
directs the command at a set of subordinate objects.
•
ALL specifies that the current object type and all subordinate object types are
selected. ALL is the default.
•
NONE specifies that no subordinate objects are selected.
•
ONLY specifies that only object types subordinate to the current object are
selected.
See the command syntax summary in Appendix A, OSI/MHS SCF Command
Syntax Summary, to see where SUB is supported for this command.
DELETE [ / OUT file-spec / ] [ object-spec ]
[ , SUB [ ALL | NONE | ONLY ] ] [ , { NORMAL | MAX } ]
Object Type Name Format
APPL [\psystem.]$proc.#applname
CLASS [\psystem.]$proc.#class
CUG [\psystem.]$proc.#cug
CUGMEMBER [\psystem.]$proc.#cug.cugmember
DLIST [\psystem.]$proc.#dlist
DLISTMEMBER [\psystem.]$proc.#dlist.dlistmember
GATEWAY [\psystem.]$proc.#gateway
GROUP [\psystem.]$proc.#class.[\gsystem.]group
MTA [\psystem.]$proc.#mta
ROUTE [\psystem.]$proc.#mta.route
SUBSYS [\psystem.]$proc.#subsys