OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-104
INFO Command Displays
See the command syntax summary in Appendix A, OSI/MHS SCF Command
Syntax Summary, to see where SUB is supported for this command.
SEL [ NOT ] state
directs the command only at objects in the specified state or not in the specified
state. Valid values for state are: DEFINED, STARTING, STARTED,
STOPPING, STOPPED, and SUSPENDED. States are described in Section 1,
Introduction.
DETAIL
causes the command to produce a detailed display. If you omit this parameter, a
summary display is provided.
Example
This command displays the current attribute settings for GROUP object
$ZMHS.#MR.MRGRP3:
INFO GROUP $ZMHS.#MR.MRGRP3
INFO Command Displays
The information displays that result from entry of an INFO command for each of the
object types listed above are shown on the following pages.
INFO APPL Display
The display format for the INFO APPL display without the DETAIL option is:
Appl
is the name of the APPL object for which information is being displayed.
Access-type
is the type of access method used for message submission and delivery. The
displayed value is either GW (gateway) or MS (MS Group).
Note. In all the displays for the INFO command, an asterisk (*) before the attribute indicates
that the value of the attribute can be changed using the ALTER command with the related
object in the STOPPED summary state.
In the displays for the INFO CLASS MR and INFO SUBSYS commands, a number sign (#)
before the attribute indicates that the value of the attribute can be changed using the ALTER
command, regardless of the summary state of the related object.
MHS info APPL
Appl Access-type Access-name
appl-id access-type access-name