OSI/MHS SCF Reference Manual

About This Manual
OSI /MHS SCF Reference Manual—424828-001
xiv
Related Manuals
Figure ii shows how this manual is related to other Compaq manuals. The following is a
description of the purpose and content of each manual in Figure ii.
For background information on the Compaq environment, you may want to read the
following manuals:
•
Introduction to Compaq Networking and Data Communications. This manual
provides an overview of aspects of networking and data communications specific to
Compaq systems.
•
Introduction to Distributed Systems Management (DSM). This manual introduces
the products and components called collectively Distributed Systems Management.
It also discusses subsystem enhancements to support DSM.
•
Subsystem Control Facility (SCF) Reference Manual. This manual describes the
operation of SCF and tells system and network managers, operators, and
programmers how to use it to configure, control, and inquire about supported data
communications subsystems.
For information specific to OSI/MHS, you may want to read the following manual:
•
OSI/MHS Configuration and Management Manual. This manual describes how to
plan, install, configure, manage, and maintain a Compaq OSI/MHS subsystem.
For information on event and problem management, you may want to read the following
manuals:
•
PTrace Reference Manual. This manual tells system and network managers how to
display trace files created by the SCF TRACE command.
•
EMS Manual. This manual tells system and network managers how to write event-
message filters to select event messages of particular interest, and how to distribute
event messages to various destinations.
•
Operator Messages Manual. This manual describes system messages and provides
an explanation of the cause, a discussion of the effect on the system, and suggestions
for corrective action.
•
ViewPoint Manual. This manual describes ViewPoint, a multifunction operations
console application that allows the management of a network of systems.
For information on underlying OSI subsystems, you may want to read the following
manuals:
•
OSI/AS Configuration and Management Manual. This manual provides task-
oriented information necessary for the installation and management of Compaq
OSI/AS services.
•
SCF Reference Manual for OSI/AS. This manual describes how to use SCF
commands to install, control, and inquire about the Compaq OSI/AS subsystem.
•
SCF Reference Manual for OSI/TS. This manual describes how to use SCF
commands to install, control, and inquire about the Compaq OSI/TS subsystem.
•
SCF Reference Manual for TLAM. This manual describes how to use SCF
commands to install, control, and inquire about the Compaq TLAM subsystem.