OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-144
STATS Command
STATS Command
The STATS command displays the current statistical counters for the APPL, MON and
PROCESS objects. This is a sensitive command only when the RESET option is used.
OUT file-spec
directs any SCF output generated for this command to the specified file.
SEL [ NOT ] state
directs the command only at objects in the specified state or not in the specified
state. Valid values for state are: DEFINED, STARTING, STARTED,
STOPPING, STOPPED, and SUSPENDED.
object-spec
is the name of the object (APPL, MON or PROCESS) for which the current
statistical counters are displayed. The object-spec for the STATS command is
one of the following:
RESET
specifies that the statistical counters should be reset after the statistical counters are
displayed. For the APPL object, all the STORED MESSAGES and the DELETED
MESSAGES fields are set to zero. The MAXIMUM VALUES fields are taken from
the current values of the APPL STATUS counters.
Considerations
•
The SEL specifier is only valid for MS APPL objects.
•
A PROCESS object must be in a group that is in the STARTED state.
•
The STATS APPL command applies only to APPL objects of type MS.
•
The STATS command displays contain timestamp fields. The time shown in these
fields reflects local system time. The local system is defined as the system on which
the OSI/MHS subsystem is running.
STATS [ / OUT file-spec / ] [ object-spec ] [ , RESET ]
[ , SEL [ NOT ] state ]
Object Type Name Format
APPL [\psystem.]$proc.#applname
MON [\psystem.]$proc
PROCESS [\psystem.]$proc.#[\gsystem.]pname