OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-160
STATS Command Displays
User-submitted
is the number of messages submitted by APPL objects.
An example of the display for the STATS PROCESS MRP command is:
STATS PROCESS RS Display
The format of the display for the STATS PROCESS RS command is:
Reset-time
reports the last time the statistics information was reset (either by the
RESETSTATS, or the START command).
Sample-time
reports when the sample was taken (when the response buffer was built).
CPU
reports the CPU in that the process is running, or -1 if the process is not running.
Protocol-errors
is the number of protocol errors which have been detected.
Msgs-sent
is the number of APDUs sent by the ROS.
Msg-bytes-sent
is the number of message bytes sent by the ROS in kilobytes.
MHS stats PROCESS MRP \HAP.$M41
Reset-time........ 31 Jul 1992, 14:04:45.893
Sample-time....... 31 Jul 1992, 15:07:30.111
CPU............... 1 Invalid-msgs...... 0
Probes-received... 0 Probes-sent....... 0
Reports-received.. 1 Reports-sent...... 0
User-msgs-received 0 User-msgs-sent.... 0
User-cancel....... 0 User-delivered.... 0
User-probes....... 0 User-report....... 1
User-submitted.... 0
MHS stats PROCESS RS process-id:
Reset-time........ timestamp
Sample-time....... timestamp
CPU............... cpu-no Protocol-errors... int32
Msgs-sent......... int32 Msg-bytes-sent.... int32
Msgs-received..... int32 Msg-bytes-received int32
Inc-assocs-open... int32 Inc-assocs-closed. int32
Inc-assocs-rej.... int32