OSI/MHS SCF Reference Manual

OSI/MHS SCF Commands
OSI /MHS SCF Reference Manual—424828-001
2-166
STATUS Command
STATUS Command
The STATUS command displays status information, such as the dynamic state, the last
error, and modifiable values, of the specified object. You can display status information
about the APPL, CLASS, ENTRY, GROUP, MON, PROCESS, and SUBSYS objects.
This is a nonsensitive command.
OUT file-spec
directs any SCF output generated for this command to the specified file.
object-spec
specifies the name of the object for which you want to display status information.
The object-spec for the STATUS command is one of the following:
SUB [ ALL | NONE | ONLY ]
directs the command at a set of subordinate objects.
•
ALL specifies that the current object type and all subordinate object types are
selected. ALL is the default.
•
NONE specifies that no subordinate objects are selected.
•
ONLY specifies that only object types subordinate to the current object are
selected.
See the command syntax summary in Appendix A, OSI/MHS SCF Command
Syntax Summary, to see where SUB is supported for this command.
SEL [ NOT ] state
directs the command only at objects in the specified state or not in the specified
state. Valid values for state are: DEFINED, STARTING, STARTED,
STATUS [ / OUT file-spec / ] [ object-spec ]
[ , SUB [ ALL | NONE | ONLY ] ] [ , SEL [ NOT ] state ]
[ , DETAIL ]
Object Type Name Format
APPL [\psystem.]$proc.#applname
CLASS [\psystem.]$proc.#class
ENTRY [\psystem.]$proc.#entry
GROUP [\psystem.]$proc.#class.[\gsystem.]group
MON [\psystem.]$proc
PROCESS [\psystem.]$proc.#[\gsystem.]pname
SUBSYS [\psystem.]$proc.#subsys